當前位置：
依客思防爆科技有限公司 >
產品中心 >
防爆軸流風機風扇類 > 依客思FB/BTS-500 FBBTS-防爆搖頭廠用立式壁式
依客思FB/BTS-500 FBBTS-防爆搖頭廠用立式壁式
| 產品型號： |
FB/BTS-500 |
| 品 牌： |
依客思 |
|
|
| 所 在 地： |
湖北武漢 |
| 更新日期： |
2026-07-20 |
| | 品牌：依客思 | | 型號：FB/BTS-500 | | 加工定制：是 | |
| | 電機功率：0.37KW-0.75KW w | | 電壓：220V、380V V | | 風量：6600m3/h-18000 m3/h | |
| | 適用范圍：機械、石油、化工、倉庫 | | 風葉直徑：500-750MM | | 轉速：1450(r/min) | |
一：BTS-500/220V防爆立式搖頭扇使用場所
1. 1區、2區危險氣體場所;
2.ⅡA、ⅡB、ⅡC類T1-T6組爆炸性氣體或蒸氣環境;
3. 戶內、戶外(IP54，IP65*訂購時需提出 )。
二：BTS-500/220V防爆立式搖頭扇主要技術參數：
1.執行標準：GB 3836.1、GB 3836.2、GB 3836.3、GB 12476.1、IEC 60079
FB系列防爆搖頭風扇其防爆性能符合GB3836.1《爆炸性環境用防爆電氣設備通用要求》和GB3836.2《爆炸性環境用防爆電氣設備隔爆型電氣設備“d”》的規定，制成隔爆型，防爆標志為dⅡBT4，其防爆性能經的防爆電氣產品質量監督檢驗單位全面測試合格，取得了防爆合格證。
本產品具有防爆性能好、結構合理、運行平穩、使用方便、外形美觀等優點。風葉采用高強度鋁合金制成。適用于工廠內含有級別為ⅡA、ⅡB級，溫度組另為T1-T4組的可燃性氣體與空氣形成的爆炸性氣體混合物，劃分區域為1去、2區的場所如：石油、化工、機械、醫藥、冶金等行業的車間、倉庫、辦公室、加油站等處的防爆降溫。
主要由鋁合金風葉、鋼絲護罩、防爆電機、1.1米立桿、底盤、壁式安裝架組成，根據配件組合可選為落地式防爆搖頭扇和壁式防爆搖頭扇。
1、風葉采用含鎂量小于0.5%（重量比）的高強度鋁合金制成。
2、隔爆型三相異步電動機和隔爆型外殼有機座、前、后端蓋組成，其材質采用高強度鑄鐵制成，機座與端蓋的結合面為隔爆接合面，接合長度大于12.5mm，間隙小于0.2mm，端蓋與軸組成的圓筒隔爆面，其隔爆長度大于12.5mm，間隙小于0.3mm，單邊間隙小于0.2mm，***小單邊間隙大于0.075mm。
3、搖頭機構由電動驅輪減速器，牽動連桿旋盤等零件運動來實現。旋盤上有三個螺孔，其分布位置位于旋盤中心，距旋盤中心15mm和旋盤中心22mm，用于調節搖頭擺角，當連桿的一端接于旋盤中心，則不搖頭，接于距旋盤中心15 mm處時，搖頭擺角約為45°，接于距旋盤中心22 mm處時，搖頭擺角約為90°。
4、搖頭扇有二種固定方式，一種為落地式，另一種為壁式。落地式配立桿及底座，墻固式配墻上固定三角安裝架。
One: BTS-500/220V explosion-proof vertical shaking head fan use place
1. Hazardous gas sites in Zone 1 and Zone 2;
2.ⅡA, ⅡB, ⅡC class T1-T6 explosive gas or vapor environment;
3. Indoor and outdoor (IP54, IP65* when ordering).
Two: BTS-500/220V explosion-proof vertical shaking head fan main technical parameters:
1. Implementation standards: GB 3836.1, GB 3836.2, GB 3836.3, GB 12476.1, IEC 60079
The explosion-proof performance of FB series explosion-proof shaking head fan conforms to the provisions of GB3836.1 "General requirements for explosion-proof electrical equipment for Explosive environment" and GB3836.2 "Explosion-proof electrical equipment for Explosion-proof electrical equipment for Explosive environment" d ", and is made into flameproof type, and the explosion-proof mark is DⅱBT4. Its explosion-proof performance has passed the comprehensive test of the explosion-proof electrical product quality supervision and inspection unit, and obtained the explosion-proof certificate.
This product has the advantages of good explosion-proof performance, reasonable structure, stable operation, easy to use, beautiful appearance and so on. The blades are made of high strength aluminum alloy. It is suitable for explosion-proof cooling of workshops, warehouses, offices, gas stations, etc. of petroleum, chemical, machinery, medicine, metallurgy and other industries containing grade ⅡA, ⅡB, and the explosive gas mixture formed by combustible gases and air in the temperature group of T1-T4, divided into 1 and 2 zones.
It is mainly composed of aluminum alloy wind blade, steel wire shield, explosion-proof motor, 1.1m vertical rod, chassis and wall mounting frame. According to the combination of accessories, it can be selected as floor explosion-proof rotating fan and wall explosion-proof rotating fan.
1, the wind blade is made of high-strength aluminum alloy with magnesium content less than 0.5% (weight ratio).
2, flameproof three-phase asynchronous motor and flameproof shell organic base, front and rear end cover, the material is made of high strength cast iron, the base and end cover of the joint surface for flameproof joint surface, joint length is greater than 12.5mm, gap is less than 0.2mm, the end cover and shaft composed of cylinder flameproof surface, the flameproof length is greater than 12.5mm, gap is less than 0.3mm, The single side gap is less than 0.2mm, and the small single side gap is greater than 0.075mm.
3. The shaking head mechanism is realized by the motion of the electric drive wheel reducer, the traction connecting rod rotating disc and other parts. There are three screw holes on the rotating disc, and the distribution position is located in the center of the rotating disc, 15mm from the center of the rotating disc and 22mm from the center of the rotating disc, used to adjust the swing Angle, when one end of the connecting rod is connected to the center of the rotating disc, it is not shaking the head, when connected to the center of the rotating disc 15mm, the swing Angle is about 45°, when connected to the center of the rotating disc 22mm, the swing Angle is about 90°.
4, shaking head fan has two fixed ways, one is the floor type, the other is the wall type. Floor type distribution pole and base, wall fixed type distribution wall fixed triangle mounting frame.
手機訪問
一：BTS-500/220V防爆立式搖頭扇使用場所
