當前位置：
依客思防爆科技有限公司 >
產品中心 >
防爆LED燈類 > 依客思LED防爆燈加油站倉庫車間化工照明燈免維護投光燈戶外EKS210
依客思LED防爆燈加油站倉庫車間化工照明燈免維護投光燈戶外EKS210
| 產品型號： |
EKS210 |
| 品 牌： |
依客思 |
|
|
| 所 在 地： |
湖北武漢 |
| 更新日期： |
2026-07-20 |
| | 品牌：依客思 | | 類型：防爆照明燈 | | 加工定制：是 | |
| | 光源類型：LED | | 光源功率：10-500 W | | 電壓：220 V | |
| | 防護等級：IP65 | | 型號：EKS210 | | 電壓：220 V | |
LED防爆燈方形純鋁外殼防水防塵防爆燈具防爆平臺燈工廠加油站燈
防爆燈倉庫燈車間碼頭加油站燈三防隔爆投光燈100瓦led防爆燈現貨
一、EKS210防爆LED燈適用范圍及用途
EKS210防爆LED燈適用于II類（除煤礦以外其它爆炸性氣體環境用電設備）含有溫度組別為T1-T6的IIA、IIB、IIC級氣體或蒸汽爆炸性環境的1區、2區危險場所及可燃性粉塵環境21區、22區危險場所；
在交流50Hz、額定電壓220V線路中，作室內／外場所的照明之用。
二:EKS210防爆LED燈產品型號含義
J:帶應急功能（不注不帶）
X:吸頂式：Z:支架式
B:壁式（Bx:彎桿＋吸盤）（Bh:彎桿＋接線盒）
G:吊桿式（Gx:直桿＋吸盤）（Gh:直桿＋接線盒）
H:護欄式
F:法蘭式
三、EKS210防爆LED燈執行標準
GB 3836.1-2021 爆炸性環境第1部分：設備通用要求；
GB 3836.1-2021 爆炸性環境第2部分：由隔爆外殼＊d”保護的設備；
GB 12476.1-2013 可燃性粉塵環境用電氣設備第1部分：通用要求；
GB 12476.5-2013 可燃性粉塵環境用電氣設備第5部分：外殼保護型“tD*;
四、EKS210防爆LED燈正常使用條件
a)周圍空氣溫度：－40℃-+45℃;
b)標準大氣壓力80kPa(0.8bar)-110kPa(1.1bar),正常的含氧量21%v/v;
c)安裝地點海拔不超過2000米；
d)周圍空氣相對濕度不大于95%;
e)含有溫度組別為T1-T6的IIA,IIB、IIC級氣體或蒸汽的爆炸性環境的1區、2區危險場所及可燃性粉塵環境21區、22區危險場所；
f)無顯著搖動和顛簸的場所；
g)無破壞絕緣氣體或蒸汽的場所；
h)污染街級：3級；
i)安裝類別：II類。
五、EKS210防爆LED燈產品特點
a)散熱器采用特殊鑄鋁合金壓鑄而成，表面高壓靜電噴塑；
b)高防腐性能的不銹鋼外露緊固件；
c)止口隔爆結合面，純隔爆結構，防爆性能更可靠；
d)設計的配光系統，光利用率高，配光合理，照度均勻；
e)高強度物理鋼化玻璃，抗沖擊及熱劇變能力強，透光率高；
f)標準一體式結構設計，具有體積小、散熱性能好等特點；
g)安裝維護非常方便、快捷、安全；
First, the scope and use of EKS210 explosion-proof LED lamp
EKS210 explosion-proof LED lamp is suitable for Class II (other explosive gas environment electrical equipment except coal mine) containing temperature group T1-T6 IIA, IIB, IIC class gas or steam explosive environment of zone 1, Zone 2 dangerous places and combustible dust environment of zone 21, zone 22 dangerous places;
In AC 50Hz, rated voltage 220V line, used for indoor/outdoor lighting.
Two :EKS210 explosion-proof LED lamp product model meaning
J: With emergency function (do not note without)
X: Ceiling type: Z: scaffolding type
B: Wall type (Bx: bent rod + suction cup) (Bh: bent rod + junction box)
G: Boom type (Gx: Straight rod + suction cup) (Gh: straight rod + junction box)
H: Guardrail type
F: Flange type
Third, EKS210 explosion-proof LED lamp implementation standards
- Explosive atmospheres - Part 1: General requirements for equipment;
- Explosive atmospheres - Part 2: Equipment protected by flameproof housing * d ";
Electrical equipment for use in combustible dust environments - Part 1: General requirements
Electrical equipment for use in combustible dust environments - Part 5: Enclosure protection type "tD*";
Four, EKS210 explosion-proof LED light normal use conditions
a) Ambient air temperature: -40℃-+45℃;
b) The standard atmospheric pressure is 80kPa(0.8bar)-110kPa(1.1bar), and the normal oxygen content is 21%v/v;
c) The elevation of the installation site shall not exceed 2000 meters;
d) The relative humidity of the surrounding air is not more than 95%;
e) Hazardous places in Zone 1 and Zone 2 containing explosive environment of IIA,IIB, IIC class gases or vapors of temperature group T1-T6, and hazardous places in Zone 21 and Zone 22 of combustible dust environment;
f) where there is no significant shaking or jolting;
g) a place free from damaging insulating gas or steam;
h) Pollution street level: Level 3;
i) Installation category: Class II.
Five, EKS210 explosion-proof LED lamp product features
a) The radiator is made of special cast aluminum alloy die-casting, with high voltage electrostatic spray on the surface;
b) Exposed stainless steel fasteners with high anti-corrosion properties;
c) stop flameproof joint surface, pure flameproof structure, explosion-proof performance is more reliable;
d) Professionally designed light distribution system, high light utilization, reasonable light distribution, uniform illumination;
e) High strength physical tempered glass, strong impact and thermal shock resistance, high light transmittance;
f) Standard integrated structure design, with small volume, good heat dissipation performance;
g) Installation and maintenance is very convenient, fast and safe;
手機訪問
